Toro 07155SL Service Manual ProCore 864 1298 Preface Publication

2.
Apply   antiseize   lubricant  liberally   to   crankarm
splines and journals.
1
3.
Install crankarms  into bearing housing. Make  sure
that correct identification number on crankarm is aligned
with timing mark on bearing housing (Fig. 19).
3
3
4.
Install cap screw (item 1) and flat washer (item 2) to
retain crankarms. Do not fully tighten cap screw.
5.
Drive  new spring  pins  (item 11)  into  coring head
frame holes.
6.
Position bearing housing  assembly to coring  head
frame.
4
7.
Secure bearing housing  to frame with  four (4) cap
screws, eight  (8) hardened washers and  four (4) lock
nuts. Torque fasteners  from 70 to 80 ft−lb (95  to 108
N−m).
2
8.
Install stomper arms and couplings to crankarms on
both sides of bearing housing (see Stomper Arm Instal-
lation in this section). Do not fully tighten fasteners.
9.
Make  sure  that when  #1  crankarm  (at  pulley) is
aligned with cast  mark on bearing housing,  all subse-
quent crankarm cast  timing numbers are in  numerical
order (Fig. 19).
10.Once
all stomper  arm  and crankarm  components
have been installed, fully tighten fasteners in the follow-
ing order (Fig. 21). Tighten fasteners to the torque speci-
fications identified in Figures 17 and 20:
A.  Cap screw used to secure crankarms.
B.  Cap screws that secure top of stomper arms.
C. Cap screws that secure coupling plates (Fig. 20).
Figure 21
1.
2.
Crankarm screw
Stomper arm screw
3.
4.
Coupling plate screw
Damper lock nut
D. Lock  nuts that secure rotolink dampers to frame
(see Rotolink Damper Installation in this section).
11.
After assembly, rotate coring crankshaft by hand to
make sure that no binding occurs.
12.If
removed, install coring head drive belt (see Coring
Head Drive Belt Installation in this section).
13.Install
rear hood.
Coring Head
Page 4 − 22
ProCore 864/1298
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 72 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website