ASSEMBLY
TOOLS REQUIRED FOR ASSEMBLY
ASSEMBLE THE HANDLES AND CHUTE CRANK
1.
Loosen, but do not remove the bolts (A, Figure 3) flat washers (B),
lock washers (C) and hex nuts (D) in the upper holes of the lower
handle (E).
Remove the fasteners and the crank assembly eyebolt (F) from the
lower holes of the lower handle.
1
2
1
1
1
1
1
– Knife
– 1/2” Wrenches (or adjustable wrenches)
– 7/16” Wrenches (or adjustable wrenches)
– Wrench (or adjustable wrench)
– Pair pliers or screw driver (to spread cotter pin)
– Hammer
2.
3. Raise upper handle (G) into operating position. Upper handle should
be to the outside of the lower handle.
– Pry Bar
NOTE: Make sure the cables are not caught between the upper
and lower handle.
PARTS BAG CONTENTS
1
1
1
1
1
– Operator’s Manual
– Engine Manual
– Shear Bolt Kit, 5/16-18
– Safety Key
A
G
– Fresh Fuel Packet
C
CONTENTS OF SHIPPING CARTON
1
1
– Snowthrower
– Container of Fuel Stabilizer 1 – Snow Chute Deflector
1 – Crank Assembly
F
B
D
E
WARNING: Always wear safety glasses or eye shields
when assembling the snowthrower.
Assembling the Handles and Chute Crank
Figure 3
4.
5.
6.
7.
Replace the fasteners and the crank assembly eyebolt. DO NOT
tighten until all fasteners are in place.
Attach the crank rod (A, Figure 4) to the universal joint assembly (B)
with the hair pin (C).
Replace and tighten nut on crank assembly eyebolt (F, Figure 3).
Make sure eye bolt is properly aligned and the crank can freely rotate.
Tighten all handle bolts.
UNPACK THE SNOWTHROWER
1.
Using knife, cut along the dotted lines around the top and bottom of
carton. Then remove carton material as shown in Figure 2.
Remove shear pins and cotter pins from parts bag and place in shear
bolt storage box.
2.
NOTE: Make sure crank does not touch carburetor cover.
C
A
B
Unpacking the Snowthrower
Figure 2
Crank Assembly
Figure 4
10
Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | Murray 1695719 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)