MAINTENANCE
CHANGE THE SPARK PLUG
Remove the Snow Hood
A
B
1.
2.
3.
4.
Remove the choke control knob (A, Figure 24).
Remove the safety key (B).
Remove the mounting screws (A, Figure 25).
Slowly remove the snow hood (B) Make sure that the primer button
hose (C) and the ignition wire (D) are not disconnected.
D
E
5.
6.
The spark plug (E) can now be accessed.
To install the snow hood, first make sure that the primer button hose
and the ignition wire are connected.
C
7.
8.
Mount the snow hood to the engine and secure with the mounting
screws.
Connect the choke control knob (A, Figure 26) with the choke shaft
on the carburetor (B). Make sure the choke control knob is properly
installed. If the choke control knob is not installed correctly, the choke
will not operate.
9.
Install the safety key (C).
Removing the Snow Hood
Figure 25
A
B
C
A
B
Connecting Choke Control Knob
Figure 26
Snow Thrower Engine
Figure 24
24
| Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Murray 1695719 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)