TROUBLESHOOTING
PROBLEM
LOOK FOR
REMEDY
Scraper bar does not clean Skid shoes improperly adjusted. Raise or lower skid shoes.
hard surface.
Drive belt loose or damaged.
Replace drive belt. See authorized dealer.
Unit fails to propel itself.
Incorrect adjustment of traction Adjust traction control cable. Refer to “Check and Adjust the Cables” in the
drive cable. MAINTENANCE section of this manual.
Worn or damaged friction disc. Replace friction disc. See authorized dealer.
Auger drive belt loose or
damaged.
Replace or adjust auger drive belt. Refer to “Belt Adjustment” in the
MAINTENANCE section of this manual, or see authorized dealer.
Auger control cable not adjusted Adjust auger control cable. Refer to “Check and Adjust the Cables” in the
Unit fails to discharge
snow.
correctly.
MAINTENANCE section of this manual.
Broken shear pin.
Replace shear pin. Refer to “Auger Shear Pin Replacement” in the MAINTENANCE
section of this manual.
Discharge chute clogged.
Stop engine immediately. Always use the clean-out tool to clear a clogged
discharge chute, not your hands. Clean discharge chute and inside of auger
housing. Refer to WARNINGS in OPERATOR SAFETY section.
Foreign object lodged in auger. Stop engine immediately. Always use the clean-out tool to clear a clogged chute,
not your hands. Remove object from auger. Refer to WARNINGS in OPERATOR
SAFETY section.
31
| Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Murray 1695719 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)