18.
block bores, If necessary, move springs into position
with a small screwdriver.
Check that piston springs are centered in cylinder
21. When end cap is properly installed, the internal
springs will hold it away from the housing approximately
3/8 in.
IMPORTANT: Do not damage running surfaces of
cylinder blocks.
22. Install the four (4) capscrews which retain end cap
to housing. Tighten screws to a torque of 138 to 180
in-lb.
19.
Install two (2) alignment pins (Item 15) and install a
new gasket (Item 6) onto housing.
23. Rotate shafts to assure correct assembly. When
properly assembled, minimal torque should be required
to turn shafts.
20.
Lubricate running surfaces of end cap (Item 31) and
cylinder blocks (Item 7). Position housing opening UP
and install end cap onto housing (Item 18).
24. Wrap end of displacement control shaft with thin
plastic or use a seal protector to prevent damage to seal
during installation. Lubricate new displacement controls
shaft seal (Item 16) with petroleum jelly. Slide seal over
shaft and press it into housing bore. Be careful not to
damage seal. Install seal flush to bottomed in bore.
IMPORTANT: Make sure all parts are properly
aligned. Do not force end cap into position on hous
ing. Be careful to prevent damage to end cap and
cylinder block sealing surfaces.
23 24
22
20 21
19
18
16
17
12
15
13
14
8
7
9 10 11
1
6
2
5
3
4
25
26
27
40
28
39 38
29
36 37
35
34
33 32 31 30
2
1
4
3
Figure 26
Hydroject 3010
Page 4 - 21
Repairs
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Hydroject 3010 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)