Specifications
Water Pump Clutch: Electromagnetic, dual groove belt
drive for water pump and driveshaft flange brake/clutch
for main valve gearbox.
outlet. All high pressure water flows in and out through
the valve body. Pressure balanced valve spool with
floating (patent pending), hardened stainless seat
aligns during assembly. Bleed valve in base allows for
bleed–off of high pressure and drain down for cold
weather storage. Bolted flanges and polyurethane O–
rings mate all components to valve body.
Air gap 0.018 in.
Pre Filter – Spin down type with washable cartridge in
clear plastic housing and plastic ball valve for flushing.
Valve lift: 0.100 +0.002 –0.04 inch (with new cam)
Supply Filter – Replaceable 5 micron cartridge in plas-
tic housing with air bleed button.
Rollers – Pivoting aluminum rollers uniformly smooth
the turf and provide protection from the nozzle dis-
charge. Adjustable flow (0 – 3 GPM) spray wash system
with 6 flood tip nozzles maintain clean rollers.
Water Filter Cartridge: Toro part no. 86–8630
Water Pressure Switch – Senses for water pressure
after filter.
Pressure Relief Valve – Poppet–type valve with corro-
sion resistant stainless and brass materials.
Switch closes when pressure is over 20–28 PSI and
opens when pressure drops below 7–13 PSI.
5000
+ 300 PSI relief valve pressure.
Pump – Toro exclusive design with cast stainless steel
head and 3 piston plungers. Vee packing seals and Ke-
vlar guides. Forged crankshaft with plasma sprayed ce-
ramic on stainless steel plungers and cast iron
connecting rods.
Manifold and Nozzles – Extruded stainless steel man-
ifold with11 flanged nozzle extensions containing check
valves and hardened stainless discharge orifice. Check
valves may be reversed in housing to block unused
nozzles.
Nominal performance is 4 GPM at 5000 PSI with
Aeration Width: 33 inches with 11 nozzles on 3 inch
centers.
1400
RPM input.
Accumulator – Toro exclusive design with low charge
pressure sensor.
Aeration Depth: 4 to 6 inches depending on turf condi-
tions and nozzle configuration.
Charged with nitrogen gas charged to 2500 PSI
maximum pressure.
Hole Pattern: Variable from 1.5” to 6” spacing in the di-
rection of travel, and 3 or 6” increments in width.
Low charge pressure limit switch:
Closes at 1800 PSI
Water Pump Case Oil – See Operator’s Manual.
Opens at 1400 PSI
Water Supply – Recommend a source with 7–8 gallons
per minute. A minimum pressure of 30 psi at the ma-
chine is required for the pump to engage. Maximum al-
lowable pressure of 200 psi. Although irrigation water
pumped from ponds or effluent holding pools can be
used, not all conditions can be handled by the machines
filtration system, additional or alternative filtration may
be required.
High operating pressure limit switch:
Closes at 5500 PSI (rising pressure)
Opens at 5350 PSI (falling pressure)
Cam and Gearbox – Reduction gear drive for cam that
actuates main water valve. Roller cam follower rides on
cam specifically designed (patent pending) to control
water injection at 5.3 cycles per second (320 rpm) and
store energy in accumulator between injections. Cast
iron case also serves as 4 quart hydraulic reservoir.
DO NOT USE CHEMICALS – Concern for environ-
mental issues and corrosive affects on machine
components.
Valve – Cast stainless steel valve body functions as
mounting base for accumulator, gearbox and manifold
Specifications
Hydroject 3010
Page 6 – 2
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Hydroject 3010 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)