Toro 04134SL Rev B Hydroject 3010 Service Manual

Wheel Motor Repair (Fig. 29)
12
11
10
13
14
16   15
17
4
7
19
6
5
20
19
4
21
3
1
9
2
Figure 29
IMPORTANT: Before DISASSEMBLING motor,  plug
open ports and clean all dirt from outside of motor.
NOTE: The check balls may fall into body tapered holes
or into body valve ports during disassembly. Be sure that
the check balls are removed.
IMPORTANT: Before ASSEMBLING motor, lightly oil
all seals, rollers and threaded bolt ends.
Disassembly of Shaft Section of Motor
Disassembly of Cover Section of Motor
(See Disassembly  of Shaft  and Front  Seal Assembly
under Main Shaft Seal and/or Shaft Replacement.)
1.
Remove key (Item 11) from shaft.
Assembly of Complete Motor
2.
Mount motor  in a vice  or other holding  device with
shaft facing down.
1. Before  assembly, all  parts must be  cleaned with  a
suitable solvent and free of nicks and burrs.
3.
Remove the eight capscrews (Item 1).
2.
Mount body with pilot and bearing facing up in a vise
4.
Remove  cover &  bearing  assembly  (Item  2)  and
or other holding mechanism.
square ring seal (Item 4).
3.
Insert  shaft (Item  10)  and install  seals and  thrust
5.
Remove IGR  assembly (Item 5)  starting with outer
bearings. (See Assembly  of Shaft and  Front Seal As­
sembly under  Main Shaft Seal  and/or Shaft  Replace­
ment.)
locating ring,  rollers, outer rolls,  inner rotor and  valve
plate (Item 7). If any of these components are damaged,
entire IGR assembly must be replaced.
4.
Mount body with pilot  and bearing facing down in  a
6.
Remove the two check balls (Item 6).
vise or other holding fixture.
5.
Put  rotary valve  (Item  7) on  shaft  spline with  “T”
shaped slots on first.
Repairs
Page 4 - 24
Hydroject 3010
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 124 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website