NOTE: The drive pulley has left handed threads. To
prevent cutting reel from turning when removing drive
pulley, block reel with piece of wood.
4
3
8.
Use a 3/8” drive socket wrench to remove drive
pulley (item 17) from the cutting reel shaft.
9.
Remove two (2) shoulder nuts (item 13) that secure
the groomer RH side plate to the cutting unit side plate.
Remove the groomer RH side plate.
10.Remove
the cap plug from LH side plate (Fig. 8).
1
2
NOTE: To prevent the grooming shaft from turning
when removing flange nut, use wrench on shaft flats to
hold shaft.
Figure 7
3.
4.
11.
shaft to the LH side plate.
Remove the flange nut that secures the grooming
1.
2.
Cap screw
Front roller shaft
Grooming shaft
Locknut/spring washer
12.Pull
the grooming reel from the LH side plate.
13.Inspect
seals, bushings and bearings in side plates
for wear or damage. Replace components as needed.
2
Installation
1.
Park mower on a level surface. Make sure engine is
OFF. Remove high tension lead from the spark plug.
2.
Apply a light coating of grease to seal lips in RH and
LH side plates. Make sure that seals, bushings and
bearing are properly positioned in side plates.
1
Figure 8
Roller retaining cap screw
Cap plug
3.
Carefully place grooming reel assembly into the LH
1.
2.
side plate bearings taking care to not damage seal in
side plate. Thread flange nut onto the shaft threads but
do not fully tighten.
1
4.
Carefully place RH side plate onto grooming shaft
taking care not to damage seals in side plate. Position
side plate to the cutting unit. Secure side plate with two
(2)
shoulder nuts (item 13).
3
NOTE: The drive pulley has left handed threads. To
prevent cutting reel from turning when installing drive
pulley, block reel with piece of wood.
2
5.
Apply a light coating of grease to drive pulley hub tak-
ing care to not get grease on belt surface. Install and
tighten drive pulley onto the reel shaft.
Figure 9
6.
install pulley onto the shaft. Thread flange nut onto the
Align splines of driven pulley to grooming shaft and
1.
2.
RH side plate
Drive pulley
3. Driven pulley
shaft threads but do not fully tighten.
Greensmaster Flex 18/21
Page 8 – 9
Groomer
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.