Traction Drive Idler Pulley and Bearings
Removal
7
6
5
1.
Park machine on a level surface. Make sure engine
is OFF. Remove spark plug wire from the engine spark
plug.
4
2
3
2.
Remove transport wheels if attached (see Transport
1
Wheels in the Service and Repairs section of Chapter 6
–
Chassis and Controls).
12
3.
4.
Remove traction drive belt cover.
Remove cap screw and tab washer that secures the
8
11
9
idler bracket to the side plate of the mower (Fig. 14).
5.
Remove cap screw and shoulder nut on which the
10
idler assembly pivots (Figs. 13 and 14). Remove idler
assembly.
Figure 12
1.
Gearbox axle shaft
Frame
Idler bracket
Bearing
Pulley sleeve
Traction drive belt
7.
8.
9.
10. Cap screw
11. Cap screw
Traction drive pulley
Traction driven pulley
Shoulder nut
2.
3.
4.
5.
6.
6.
If idler pulley sleeve or bearings require replace-
ment:
A. Pull bearings and pulley sleeve from idler.
B. Press bearings from pulley sleeve.
12. Tab washer
Installation
1
1.
is OFF. Remove spark plug wire from the spark plug.
Park machine on a level surface. Make sure engine
2
2.
If idler pulley sleeve or bearings were removed:
A. Press bearings into pulley sleeve making sure to
apply pressure to outer bearing race only.
3
B. Install pulley assembly onto idler shaft pressing
on inner bearing race.
3.
Position idler assembly using cap screw and shoul-
der nut (Figs. 13 and 14). Tighten shoulder nut. Check
that idler assembly can pivot freely after tightening
shoulder nut.
Figure 13
3.
1.
2.
Idler pulley
Idler bracket
Shoulder nut
4.
Install cap screw and tab washer that positions the
1
idler bracket to the side plate of the mower (Fig. 14).
Make sure that washer tab is in slot and orientated
down.
2
3
5.
Adjust traction belt tension (see Operator’s Manual).
6.
Install traction drive belt cover and secure with flange
nut. Torque flange nut 100 in–lb (11.3 N–m).
Replace transport wheels if they were attached (see
7.
Transport Wheels in the Service and Repairs section of
Chapter 6 – Chassis and Controls).
Figure 14
1.
2.
Side plate
Idler bracket cap screw
3.
Idler pivot cap screw
8.
Connect spark plug wire to spark plug.
Greensmaster Flex 18/21
Page 4 – 11
Traction and Reel Drive System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.