Traction Drum Assembly (Fig. 15)
4. Position drum spacers to sides of drum.
1.
Assemble hub/spindle assembly (Fig. 17):
5. Insert bar stock or other suitable tool through spokes
of drum to keep drum from turning.
A. Press one bearing into drum hub by applying
pressure to outer bearing race. Install bearing
spacer into drum hub and fill cavity between spacer
and drum hub with Mobil High Temperature
XHP–222 grease (or equivalent). Press second
bearing into drum hub by applying pressure to outer
bearing race. Make sure that spacer is centered in
hub.
NOTE: The left side drum shaft has left hand threads
(Fig. 16).
6.
Apply antiseize lubricant to drum shaft (item 8)
threads and install shafts through bearings, spacers and
into drum. After both shafts are installed, torque drum
shafts from 65 to 75 ft–lb (88 to 102 N–m).
7.
Tighten the fasteners that secure the bearing flan-
B. Pack rear cavity of oil seals with Mobil High Tem-
perature XHP–222 grease (or equivalent). Fill hub
cavity between bearings and seal positions with Mo-
bil High Temperature XHP–222 grease (or equiva-
lent).
gettes (item 10) to the machine frame. Tighten the bear-
ing set screw (item 25) to secure each bearing to the
drum shaft. Torque set screws from 40 to 50 in–lb (4.5
to 5.7 N–m).
NOTE: The left side drum pulley has left hand threads
(Fig. 16).
C. Press seals into hub so the seals are flush with
the hub surface. Lightly grease lip of both seals.
8.
the drum shafts. Secure both drum pulleys (item 19) to
the drum shafts.
Apply antiseize lubricant to the external threads of
D. Lightly grease the drum spindle and slide spindle
into the hub. Slide seal ride spacer onto spindle and
insert spacer into oil seal. Secure drum spindle to
prevent it from turning and then secure spindle to the
hub with lock nut.
NOTE: The right side wheel shaft has left hand threads
(Fig. 16).
2.
cure each traction drum to hub/spindle with four (4) cap
screws and lock washers. Torque cap screws 100 in–lb
Position traction drums to hub/spindle assembly. Se-
9.
the transport wheel shafts (item 17). Install wheel shafts
into drum drive shafts. Torque wheel shafts from 45 to
55
Apply Loctite #242 (or equivalent) to the threads of
(11.3
N–m).
Traction Drum Installation (Fig. 15)
Position machine on a level surface. Make sure en-
ft–lb (61 to 75 N–m).
10.Install
Traction Drive Belt Replacement in this section).
traction belts and adjust belt tension (see
1.
gine is OFF. Remove spark plug wire from the spark
plug.
11.
nut. Torque flange nut 100 in–lb (11.3 N–m).
Install traction drive belt cover and secure with flange
2.
If removed, loosely install bearings (item 11) and
12.Install
Transport Wheels in the Service and Repairs section of
Chapter 6 – Chassis and Controls).
transport wheels if they were attached (see
bearing flangettes (item 10) to machine frame. Make
sure that extended race of bearings is positioned to the
outside of the frame.
13.Connect
spark plug wire to spark plug.
3.
Pivot mower back and position traction drum assem-
bly under the mower. Lower mower onto traction drum.
Traction and Reel Drive System
Page 4 – 14
Greensmaster Flex 18/21
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.