Roller Removal (Fig. 22)
Park machine on a level surface. Make sure engine
Roller Installation (Fig. 22)
1.
1. To install front roller:
is OFF. Remove spark plug wire from the engine spark
plug.
A. Insert one end of front roller into height–of–cut
arm that is secured to cutting unit side plate.
2.
To remove front roller assembly:
B. Slide second height–of–cut arm onto front roller
shaft. Secure height–of–cut arm to side plate with
height–of–cut washer and lock nut.
A. Loosen cap screw that secures front roller shaft
to height–of–cut arm on both sides of the mower.
B. On one side of cutting unit, remove lock nut and
height–of–cut washer that secure height–of–cut arm
to side plate.
C. If equipped with groomer, secure groomer side
plate to height–of–cut arm with lock nut and spring
washer.
C. If equipped with groomer, remove lock nut and
spring washer that secures groomer side plate to
height–of–cut arm loosened in step B.
2. To install rear roller:
A. Place rear roller shaft between roller spacer and
shaft retainer that are still attached to the cutting unit
side plate.
D. Slide height–of–cut arm from end of front roller
shaft.
NOTE: Place roller shim above side plate flange
when HOC is from 1/16” to 1/4” (1.6 to 6.3 mm).
Place roller shim below side plate flange when HOC
is from 1/8” to 1” (3.2 to 25.4 mm).
E. Remove front roller from height–of–cut arm that
remains secured to cutting unit side plate.
3.
To remove rear roller assembly:
B. Install roller spacer and shaft retainer onto rear
roller shaft on the opposite side of the cutting unit.
Install two (2) socket head screws, roller shim and
flange nuts but do not tighten fully (Fig. 22).
A. On one side of the cutting unit, loosen two (2)
flange nuts that secure rear roller.
B. On other side of cutting unit, remove two (2)
flange nuts, socket head screws, roller shim, roller
spacer and shaft retainer that secure rear roller. Note
location of roller shim for assembly purposes.
3.
Center installed roller evenly between the sides of
the cutting unit. Secure roller in place by tightening the
fasteners.
C. Remove rear roller from retainer that remains se-
cured to cutting unit side plate.
4.
adjust as necessary.
If front roller was removed, check height–of–cut and
5.
Attach spark plug wire to engine spark plug.
Greensmaster Flex 18/21
Page 7 – 17
Cutting Unit
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.