2.
bearings with installation washers and spacers (see
Special Tools) as follows:
If tool TOR4105 is not available, install seals and
E. Install tool (with seal installed) onto each end of
the roller shaft. Tighten each tool until the tool shoul-
der bottoms out against the roller housing. Remove
tools from roller shaft.
NOTE: If bearing lock nuts are being replaced, use
original lock nuts for assembly purposes, if possible.
This will preserve the patch lock feature in the new
lock nuts. Use the new nuts only after new bearings
and seals have been installed.
4. Lubricate lips of installed seals with #2 grease.
5.
Insert a v–ring seal onto each bearing lock nut with
the thick shoulder of the v–ring seal toward the lock nut
(Fig. 24).
A. Position a new bearing, black assembly washer
(see Special Tools) and original lock nut onto each
end of the roller shaft (Fig. 25).
NOTE: If original bearing lock nut(s) are being used,
apply Loctite #242 (or equivalent) to threads of lock
nut(s).
B. Tighten nuts until the bearings are seated into
each end of the roller. Remove nut and black assem-
bly washer from each end of the roller.
6.
the roller shaft. Torque lock nuts from 25 to 30 ft–lb (34
to 41 N–m).
Install bearing lock nut with v–ring onto each end of
IMPORTANT: Failure to grease bearing lock nut
before seal installation may cause seal damage.
2
3
C. Apply a coating of grease to bearing lock nut
shoulder surface to prevent seal damage during seal
installation (Fig. 26).
1
4
D. Carefully install seals onto bearing lock nuts.
Pack the back of the seal 75 to 90% full with #2
grease (Fig. 26).
E. Install a nut with seal onto each end of the roller
shaft. Tighten nuts until they bottom against bearings
(Fig. 27). Remove nuts from roller shaft.
4
Figure 26
1.
2.
Bearing lock nut
Seal
3.
4.
Grease nut surface
Pack with grease
F. Position an assembly spacer and yellow assem-
bly washer (see Special Tools) on each end of roller
shaft (Fig. 28). Thread nut onto each end of shaft.
2 1
G. Tighten each nut until the yellow assembly wash-
ers bottom out against the roller housing. Remove
nuts, assembly washers and assembly spacers from
roller shaft.
3.
If tool TOR4105 (see Special Tools) is available,
install seals and bearings with tool TOR4105 as follows:
Figure 27
1.
Bearing lock nut
2.
Seal
A. Position a new bearing and tool TOR4105 onto
each end of the roller shaft.
2
3
4
B. Tighten tools until the bearings are fully seated
into each end of the roller. Remove tool from each
end of the roller.
1
IMPORTANT: Failure to grease tool shoulder be-
fore seal installation may result in seal damage.
C. Apply a coating of grease to tool shoulder to pre-
vent seal damage during seal installation.
Figure 28
1.
2.
Bearing lock nut
Yellow assembly washer
3.
4.
Assembly spacer
Seal
D. Carefully install seal onto each of the tools. Pack
the back of the seal 75 to 90% full with #2 grease
(Fig. 26).
Greensmaster Flex 18/21
Page 7 – 19
Cutting Unit
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.