While Operating
1.
quate ventilation. Exhaust fumes are hazardous and
could be deadly.
Do not run the engine in a confined area without ade-
5. Before emptying basket of clippings, disengage trac-
tion and reel drives, reduce engine speed and move on/
off switch to OFF position to stop engine.
2.
operating the machine.
Always stand behind the handle when starting and
6. Do not touch engine, muffler or exhaust pipe while
engine is running or soon after it has stopped because
these areas are hot enough to cause burns.
3.
To start the engine:
7.
If the cutting unit strikes a solid object or vibrates ab-
A. Open fuel shut-off valve. Make sure spark plug
wire is connected to spark plug.
normally, stop immediately, turn engine off, wait for all
motion to stop and inspect for damage. A damaged reel
or bedknife must be repaired or replaced before opera-
tion is commenced.
B. Verify that the control lever on handle is in NEU-
TRAL position for both traction and reel drives.
8.
gine is stopped and cutting unit reel is not spinning.
Whenever machine is left unattended, be sure en-
C. Move on/off switch to ON position, set choke to
full choke position (cold start) and throttle to half
throttle.
9.
Close fuel shut-off valve if machine is not to be used
for an extended period of time. Also, close fuel shut-off
valve if machine is to be transported on a trailer or in a
vehicle.
D. Pull starter cord to start engine.
To stop the engine:
4.
A. Disengage reel and traction drives and reduce
engine speed to SLOW.
B. Move on/off switch to OFF position to stop en-
gine.
Maintenance and Service
1.
Before servicing or making adjustments to the ma-
6. Do not overspeed the engine by changing governor
settings. Maximum engine speed is 3600 RPM. To en-
sure safety and accuracy, check maximum engine
speed with a tachometer.
chine, stop the engine and wait for all machine move-
ment to stop. Remove the spark plug wire from the spark
plug to prevent accidental starting of the engine.
2.
keep all nuts, bolts, screws and belts properly tightened.
To make sure entire machine is in good condition,
7. Engine must be shut off before checking oil or adding
oil to the engine crankcase or transmission.
3.
free of excessive grease, grass, leaves and accumula-
tion of dirt.
To reduce potential fire hazard, keep the engine area
8. If major repairs are ever needed or assistance is re-
quired, contact an Authorized TORO Distributor.
9.
At the time of manufacture, the machine conformed
4.
or servicing the cutting unit.
Wear heavy gloves and use caution when checking
to all applicable safety standards. To assure optimum
performance and continued safety certification of the
machine, use genuine Toro replacement parts and ac-
cessories. Replacement parts and accessories made
by other manufacturers may result in non-conformance
with the safety standards and the warranty may be
voided.
5.
If the engine must be running to perform mainte-
nance or make an adjustment, keep hands, feet, cloth-
ing and all parts of the body away from the cutting unit
and all moving parts. Keep bystanders away.
Greensmaster Flex 18/21
Page 1 – 3
Safety
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.