C. If cutting unit is equipped with a groomer, remove
LH groomer side plate (see Groomer Reel Bearing
Replacement in the Service and Repairs section of
Chapter 8 – Groomer).
3
1
D. Locate and retrieve three (3) spacers (items 4
and 5) from between reel drive plate and side plate.
2
7.
Remove front and rear rollers from cutting unit (see
Roller Removal in this section).
8.
Support reel weight on right side of the cutting unit to
prevent it from falling. Remove two (2) cap screws and
flat washers that secure weight. Remove reel weight
from cutting unit.
2
NOTE: The reel bearing lock nut has left hand threads.
Figure 30
1.
2.
Cap screw w/lock washer
Cap screw w/flat washer
3.
LH cutting reel sideplate
9.
Block reel with a piece of wood to prevent reel from
turning. Remove reel bearing lock nut from right side of
reel.
40
to 50 ft–lb
9
5
(54 to 68 N–m)
10.Remove
cap screw, flat washer and lock nut that se-
12
cures grass shield to RH side plate.
6
IMPORTANT: Support reel to prevent it from falling as
7
side plate is removed.
11.
secure RH side plate to crossmember (Fig. 32). Slide
RH side plate and pitch arm from reel shaft.
Remove two (2) shoulder bolts and square nuts that
3
1
Antiseize
Lubricant
4
8
12.Slide
unit.
cutting reel from the LH side plate and cutting
11
10
2
Figure 31
13.If
from crossmember and grass shield.
necessary, remove LH side plate and pitch arm
1.
2.
3.
4.
5.
6.
Flange nut
7.
8.
9.
10. Cap screw (2 used)
11. Flat washer (2 used)
Cap screw
Reel drive plate
Woodruff key
Drive pulley (22 tooth)
Lock nut (2 used)
Spacer (2 used)
Spacer
14.Refer
mation on reel inspection and wear sleeve and v–ring
seal service.
to Cutting Reel Service in this section for infor-
Lock washer
12. Seal spacer
Cutting Reel Installation (Fig. 29)
7
6
210 to 240 in–lb
5
1.
Use a flat level surface or a stable work bench to
(23.7 to 27.1 N–m)
install cutting reel.
1
2.
If separated, attach LH side plate to crossmember
with two (2) shoulder bolts and square nuts (Fig. 32).
Torque shoulder bolts from 210 to 240 in–lb (23.7 to
27.1
bushing on side plate.
N–m). Make sure that LH pitch arm is installed on
2
4
3.
Apply antiseize lubricant to bearing journals of cut-
ting reel.
3
4.
erly installed on both ends of reel shaft (see Cutting Reel
Service in this section).
Make sure that wear sleeve and v–ring seal are prop-
Figure 32
1.
2.
3.
4.
Crossmember
5.
LH side plate
Nylon bushing
Rubber bushing
Shoulder bolt (4 used)
RH side plate
6.
7.
5.
Apply grease to lips of grease seals in side plates to
Square nut (4 used)
ease reel installation.
Greensmaster Flex 18/21
Page 7 – 21
Cutting Unit
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Greensmaster 04018, Toro Greensmaster 04019, Toro Greensmaster 04022, Toro Greensmaster 04024, Toro Greensmaster 04025, Toro Greensmaster 04030, Toro Greensmaster 04031 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Lawn and Garden readers have rated Toro 06149SL Models 04018 04019 04030 04022 04024 04025 04031 Service Manual 3.0 out of 3.0 based on 1 product reviews. i gone through your website about Safety Shoes Manufacturers & Distributors
its really amazing. if you want additional information about Safety Shoes Manufacturers & Distributors contact Us.
Safety Shoes Manufacturers & Distributors.