Check Fuel Lines and Connections
Fuel Tank Installation (Fig. 2)
Check fuel lines and connections periodically as recom-
mended in the Operator’s Manual. Check fuel lines for
deterioration, damage or leaking connections. Replace
hoses, clamps and connections as necessary.
1. Position foam strips, fuel tank and tank straps to ma-
chine frame. Place felt strip between tank and both tank
straps.
2.
Secure straps and fuel tank to frame with four (4)
Drain and Clean Fuel Tank
flange nuts.
Drain and clean the fuel tank periodically as recom-
mended inthe Operator’s Manual. Also,drain and clean
the fuel tank if the fuel system becomes contaminated
or if the machine is to be stored for an extended period.
3. Connect fuel hose to fuel tank outlet at bottom of
tank. Secure hose with clamp.
4.
Connect fuel hose to the fuel filter inlet. Secure hose
with clamp.
To clean fuel tank, flush tank out with clean solvent.
Make sure tank is free of all contaminates and debris.
5.
6.
terminal. Tighten nut that secures battery cable from 10
to 15 ft--lb(14 to 20 N--m).Make sure that battery cover
is secured.
Add fuel to tank and check for any fuel leaks.
Connect negative battery cable to negative battery
Fuel Tank Removal (Fig. 2)
1.
Chock wheels to prevent machine from moving.
ParkmachineonalevelsurfacewiththeengineOFF.
2.
To prevent unexpected machine operation, discon-
nect the negative battery cable from the battery terminal
(see Battery Service in the Service and Repairs section
of Chapter 4 -- Electrical System). Position discon-
nected negative cable away from the negative battery
terminal.
2
3.
4.
Disconnect fuel hose from the fuel filter inlet.
Lower end of disconnected fuel line into a suitable
3
container and drain fuel tank.
5.
from tank outlet at bottom of tank.
Afterfueltankiscompletely empty,remove fuelhose
1
6.
to machine. Remove straps and felt strips.
Remove four (4) flange nuts that secure tank straps
Figure 3
1.
2.
Engine blower housing
Fuel filter
3. Fuel filter inlet
7.
8.
Lift fuel tank from machine.
Make sure to clean up any spilled fuel. Also, check
thatfoam strips under fuel tank location are in good con-
dition.
ProForce Debris Blower
Page 3 -- 7
Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)