Remote Transmitter
The remote transmitter is a solid state electrical device
that sends radio frequency (RF) signal inputs to the ma-
chine control module for control of machine electrical
operation (Fig. 16). The remote transmitter has suffi-
cient range to send an RF signal to the control module
from the tow vehicle operator position.
2. Lift rear cover from remote transmitter.
Remove batteries from remote transmitter and re-
3.
place with three (3) new AAA alkaline batteries.
4.
Place rear cover on remote transmitter and secure
with six (6) screws.
When a button on the remote transmitter is pressed, the
LED on the remote should flicker (Fig. 17). If the ma-
chine control module is energized (control module Time
OutandPowerLED’sarebothilluminated)andaremote
transmitter button is pressed, the corresponding control
module LED should illuminate and the control module
RF activity LED should flicker.
If the control module is energized (control module Time
Out and Power LED’s are both illuminated), remote but-
ton functions are as follows:
Pressing the Engine Start button initiates a starting se-
quence to start the engine. This sequence (see Opera-
tor’s Manual) is necessary to prevent accidental engine
starting. After pressing the Engine Start button, the RH
Nozzle and LH Nozzle Rotate buttons are inactive for
five (5) seconds.
1
2
Figure 16
1.
Remote transmitter
2.
Control module
Pressing the Speed Increase (rabbit) button when the
engine is running causes the engine speed to increase.
Pressing the Speed Decrease (turtle) button when the
engine isrunning causes theengine speed todecrease.
7
5
Pressing the RH Nozzle Rotate button causes the blow-
er nozzle to rotate to the right.
1
Pressing the LH Nozzle Rotate button causes the blow-
er nozzle to rotate to the left.
4
6
3
Pressing the engine Stop button causes the engine to
stop running.
2
NOTE: When the engine stop button on the remote
transmitter is pressed, there will be a one (1) second
delay before the engine stop LED on the control module
illuminates. Also, for approximately five (5) seconds af-
terthestopbutton ispressed,thecontrol moduleengine
stop LED will remain illuminated and no other remote
transmitter operations can be performed.
Figure 17
1.
2.
3.
4.
Speed increase
Speed decrease
RH nozzle rotate
LH nozzle rotate
5.
6.
7.
Engine stop
Engine start
Remote control LED
The remote transmitter is powered by three (3) AAA al-
kaline batteries. If the range of the remote transmitter
has diminished or the transmitter LED does not flicker
when a button is pressed, the batteries should be re-
placed. To replace the remote batteries:
1.
Remove six (6) screws that secure the rear cover to
the remote transmitter.
ProForce Debris Blower
Page 4 -- 15
Electrical System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)