Maintenance and Service
1.
Before servicing or making adjustments to ProForce
9. Shut Debris Blower engine off before checking or
adding oil to the crankcase.
Debris Blower, position ProForce Debris Blower on a
level surface and stop blower engine. If blower is at-
tached to tow vehicle, apply tow vehicle parking brake,
stop engine and remove key from the ignition switch.
Also, turn blower ignition switch OFF and remove key
from switch.
10.Battery
acid is poisonous and can cause burns.
Avoid contact with skin, eyes and clothing. Protect your
face, eyes and clothing when working with a battery.
11.
Battery gases can explode. Keep cigarettes, sparks
and flames away from the battery.
2.
To prevent unexpected machine operation, discon-
nect battery before performing any Debris Blower ser-
vice. Disconnect negative battery cable first and
positive cable last. If battery voltage is required for trou-
bleshooting or test procedures, temporarily connect the
battery. Reconnect positivebattery cablefirst andnega-
tive cable last.
12.After
that all guards and covers are properly installed.
servicing the ProForce Debris Blower, be sure
13.When
changing tires or performing other service,
use correct supports, hoists and jacks. Make sure ma-
chine is parked on a solid level surface such as a con-
crete floor. Always chock or block wheels. Use suitable
jack stands to support the raised machine. If the ma-
chine is not properly supported by suitable jack stands,
the machine may move or fall, which may result in per-
sonal injury (see Jacking Instructions in this chapter).
3.
keeping all nuts, bolts, screws and other fasteners tight.
Make sure machine is in safe operating condition by
4.
Use care when checking or servicing the blower:
wear gloves and use caution.
14.If
the negative battery cable to prevent electrical system
damage.
welding on the machine is necessary, disconnect
5.
tow vehicle, park blower on a hard, level surface and
chock blower wheels to prevent machine movement.
Before disconnecting ProForce Debris Blower from
15.If
sired, contact an Authorized Toro Distributor.
major repairs are ever needed or assistance is de-
6.
free of excessive grease, grass, leaves and dirt.
To reduce potential fire hazard, keep engine area
16.At
the time of manufacture, the machine conformed
7.
If engine must be running to perform maintenanceor
to all applicable safety standards. To assure optimum
performance and continued safety certification of the
machine, use genuine Toro replacement parts and ac-
cessories. Replacement parts and accessories made
by other manufacturers may result in non-conformance
with the safety standards, and the warranty may be
voided.
to make an adjustment, keep hands, feet, clothing and
other parts of the body away from moving parts on the
Debris Blower. Keep bystanders away.
8.
Do not overspeed the engine by changing governor
setting. Toassuresafety andaccuracy,checkmaximum
engine speed with a tachometer.
Safety
Page 1 -- 4
ProForce Debris Blower
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)