GAS POWER SHOVEL
3.
Remove the muffler and dried gasket material and
carbon build up with a putty knife or wooden dowel
(Figure 223).
5.
Remove the cooling shroud (Figure 225).
Figure 225
0406-042
6.
Remove the ignition module. Inspect the module
and wire insulation for damage. Replace as
needed (Figure 226).
Figure 223
0406-040
4.
Remove the recoil starter assembly. Check the
condition of the starter rope. If the rope is worn,
replace it with #4 Diamond Braid Rope (Figure
224).
Figure 226
0406-043
7.
8.
Remove the flywheel (Refer to "FLYWHEEL
REMOVAL" on page 9 - 19).
Remove the backing plate. NOTE: When
reinstalling the backing plate, replace the intake
gasket with a new gasket. To ensure that the
intake gasket, backing plate, and cylinder intake
port are in proper alignment and that the gasket is
sealing properly, install the stress plate and
tighten the intake screws at 20 - 30 in·lbs. prior to
tightening the backing plate screws.
Figure 224
0406-041
9 - 18
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)