DRIVE SYSTEMS
6.
If the shaft must be completely removed from the
housing, remove the three screws retaining the
right hand side plate to the rotor housing (Figure
126). Flex the side plate and withdraw the
3.
Flex the right hand side plate and insert the rotor
shaft with externally threaded end through the left
hand side plate and bearing.
complete shaft, bearing flange, and thrust washer.
4.
5.
Tighten all the side plate retaining screws
previously loosened.
Install the remaining thrust washer on the
internally threaded end of the rotor shaft.
6.
7.
Install the bearing on the rotor shaft.
Secure the bearing with the hexhead flange screw
and washer.
8.
9.
Install the rubber sealing washer, bearing retainer,
washers, and nuts.
Reinstall the rotor paddles and pulley. Refer to
page 6 - 8, steps 6, 7, 8, and 9.
Wheel Bracket Replacement
Figure 126
0406-005
Unlike the wheel bracket assembly used on the 1980
Model Toro S-200E, the S-620 wheel bracket/muffler
assembly has an engine support bracket which is
welded to it (Figure 128).
7.
If the left hand rotor bearing must be removed, drill
out the rivets securing the bearing retainer or
flange. When the bearing flange is installed, use
three rivets (Figure 127).
Figure 128
0406-007
Figure 127
0406-006
Shaft And Bearing Reassembly
1.
2.
Insert the right hand bearing flange with studs
attached.
Install thrust washer on the externally threaded
end of the rotor shaft.
5 - 28
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)