DRIVE SYSTEMS
7.
Retighten the four bolts in the sequence shown
(Figure 108). Then tighten the starter housing bolt
on the right side of the unit (Figure 107). The four
nuts located on the crankshaft side (left side of
unit) of the engine should be torqued to 170 - 220
in·lbs. The bolt on the starter housing should be
torqued to 90 - 120 in·lbs.
3.
Using a needle nose pliers, remove the locking
clip on the master connecting link of the chain.
Remove the chain (Figure 109).
Figure 109
0217-060
4.
Using the appropriate allen wrench, loosen the
allen head screws on the crankshaft sprocket
(Figure 110). Remove the old sprocket from the
crankshaft.
Figure 108
0217-059
Note: Not following the tightening sequence can lead
to crankshaft breakage due to excessive stress. Also,
if the four nuts are over tightened, the engine casting
may break.
Note: Never attempt to install the chain to the engine
sprocket by rolling the chain onto the sprocket with the
engine firmly mounted to the equipment.
8.
Replace the shrouding, chain guard, spark plug,
and lead wire.
Crankshaft Sprocket Replacement (all models)
Figure 110
0217-061
1.
Refer to "Chain Adjustment Procedure (all
models)" on page 5 - 20. Complete steps 1
through 5.
2.
Slide the engine forward until the chain is slack.
Single Stage Snowthrower Service Manual
5 - 21
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)