ENGINE REMOVAL AND INSTALLATION
5.
On most models, the fuel tank is mounted at 3
points with capscrews and locknuts on two of the
points, the third point is a pin on the chassis that
goes through a rubber grommet (Figure 53) on the
bottom of the tank. CCR1000’s use a tongue and
groove system and one (Figure 54) mounting
screw. Remove them and lift the tank out. Now
disconnect the fuel line. Caution: If the tank had
fuel in it, there will be some remaining in the fuel
line. Be prepared to clamp the end of the fuel line
or drain it. Note: Do not use a screw or bolt to
plug the end of the fuel line. The threads can
damage the inside of the fuel line and prevent it
from sealing.
A
B
Figure 54
1854-14
(A) Screw
(B) Fuel Tank
D
6.
7.
Disconnect the wiring to the switch and the primer
line.
A
Tie a knot in the starter rope BETWEEN the
control panel and the engine. The knot in the
starter handle can now be untied and the rope
pulled through the control panel. (A slip knot is
recommended, it can be untied, at any time, by
merely pulling on the rope.)
C
B
8.
9.
Remove the locknut connecting the engine
stabilizer bracket to the recoil starter. You may
wish to loosen the bracket at the other end to pivot
it away from the engine.
Figure 53
1854-18
(A) Stabilizer Bracket
(B) Recoil Starter
(C) Rubber Grommet
(D) Pin
Remove the belt cover and roll the belt off the
engine pulley. Loosen the 2 set screws, remove
the engine pulley and key (Figure 55).
4 - 8
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)