CONTROLS/LOCATION AND OPERATION
3.
To remove the upper shroud, remove the two
bolts and locknuts in the front corners of the
shroud (Figure 31).
6.
The gears are held in the bracket by a shaft with a
push nut on either end (Figure 32). To remove the
shaft, remove one of the push nuts and pull the
shaft out.
A
H
A
B
G
F
E
C
D
Figure 31
Figure 32
1854-19
(A) Nameplate
(E) Chute Seal Retainer
(F) Chute Seal
(G) Upper Shroud
(H) Gas Cap
(B) Control Panel
(C) Lower Shroud
(D) Push Nut
(A) Shaft and Push Nut
7.
To reassemble, reverse the process.
4.
Remove 3 screws that hold the face plate to the
control panel and let the face plate hang from the
starter rope.
Note: When installing the chute, the rounded
heads of the carriage bolts must be on the inside
of the chute. The smooth head prevents snow
from building up on the bolt head.
5.
Remove the gas cap and lift the upper shroud,
replace the gas cap. The chute ring and gears are
now all exposed.
Single Stage Snowthrower Service Manual
3 - 9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)