MAINTENANCE
Installing The New Blade
1992 And Newer Style
The rotor blades are made of laminated rubber.
Examine the edge of a blade to see the differences in
the thickness of the layers. (Some blades have a part
number on the thick side of the blade.)
Beginning in 1992 the method of attaching the blades
changed slightly and a wear indicator hole also
became standard (Figure 173).
Both blades MUST be installed with the thicker layer
facing down. If this is not done, the blades will be
unbalanced, causing the snowthrower to hop or
bounce.
Press the spacer bushings into the holes in the new
blade.
A
Insert the new blade between the steel plates and
secure it with the original bolts and nuts. Position the
bolt heads on the thick (bottom) side of the blade
(Figure 172). We suggest starting with the center bolts
and move outward towards the ends. After all bolts are
installed, tighten all bolts.
Figure 173
1854-16
(A) Wear Indicator
When the paddle wears to this indicator, we
recommend replacing the blades.
D
C B A
E
The rotor blades are supported on both ends and in the
center only. Note: Completely remove and replace
one blade before starting on the other.
Many models require a Torx driver or ratchet to remove
some of the screws holding the paddles to the rotor.
These are typically used on the outer ends where snow
would build up on a conventional hex head bolt.
F
Figure 172
0623-02
(A) Bolt
(D) Locknut
(B) Washer
(C) Bushing
(E) Thick Side
(F) Thin Side
Single Stage Snowthrower Service Manual
7 - 5
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)