CONTROLS/LOCATION AND OPERATION
Reassembly is the reverse of disassembly.
Note: The rounded heads of the carriage bolts must
be on the inside of the chute. The smooth head
prevents snow from building up on the bolt head.
20” CCR Crank System
The third system, used on CCR2000 as well as the
2400, 2500 and 3600 series uses a crank that is
mounted to the handle.
Rotating the handle turns a set of gears that engage a
ring gear that the chute is mounted to. The gears are
contained in a bracket located under the upper shroud.
Figure 28
1352-08
The chute ring gear rests on a support and is held in
place by two retainers. The chute retainers allow the
ring gear to rotate only.
Remove the gas cap and lift the upper shroud off the
machine. Replace the gas cap to prevent fuel spillage
or dirt from entering the fuel system. Now you see the
chute ring, the two chute ring retainers, and the detent
arm and spring (Figure 29). To remove the chute ring,
remove the 4 bolts and nuts that retain the left and right
chute ring retainers.
To access the chute ring and gears:
1.
Remove the 3 carriage head bolts and locknuts at
the base of the chute and lift off the chute
assembly.
2.
Remove the 2 bolts and nuts that hold the chute
crank rod bracket to the lower handle and draw
the rod out of the upper shroud (Figure 30).
D
A
C
B
Figure 29
1854-40
Note: The rear bolt in the left hand chute ring retainer
is also the pivot for the detent arm. This arm engages
the notches in the chute ring to prevent unwanted
rotation of the chute. With the four bolts removed, the
retainers and chute ring will then lift off.
Figure 30
0309-22
(A) Crank Handle Grip
(B) Chute Crank Support
(C) Chute Crank Rod
(D) Spring
These parts are all plastic to eliminate the need for
lubrication and resist icing.
3 - 8
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)