DRIVE SYSTEMS
To replace the pulley, place the pulley on the hub,
making sure the 4 lugs in the hub engage the holes in
the pulley (Figure 94). Install the washer and locknut.
Either use a new locknut or apply blue Loctite or
equivalent to the threads. Torque the nut to 16 ± 2
ft·lbs (22 ± 3 N·m).
Figure 93
1854-34
20” CCR Models
The 20” CCR models have the engine pulley mounted
with a key and two set screws (Figure 92). Loosen the
set screws and the pulley will come straight off. When
installing a new pulley, apply blue Loctite to the set
screws, install the key in the crankshaft. Adjust and
tighten the setscrews as indicated in "ADJUSTING
PULLEY ALIGNMENT" on page 5 - 15.
Figure 94
1854-25
20” CCR Models
Remove the belt cover on the left side of the machine.
Remove the belt (Refer to "Replacing Drive Belt" on
page 5 - 1). Wedge a 2x4 into the paddles to prevent
rotation. Turn the bolt in the center of the pulley
counterclockwise to remove. Pull the pulley straight off
to remove (Figure 95). Note the pulley and shaft are
connected with a key. It may stay in the shaft or come
off with the pulley.
ROTOR PULLEY REPLACEMENT
Powerlite Models
Remove the belt cover on the left hand side of the
machine. Remove the belt (Refer to "Replacing Drive
Belt" on page 5 - 1). Wedge a 2x4 into the paddles to
prevent rotation. Rotate the locknut in the center of
the pulley counterclockwise to remove (Figure 93).
Pull the pulley straight off.
Figure 95
1854-01
5 - 16
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)