ELECTRIC START SYSTEM
Starter Pinion Removal
2.
Slide the connector off the starter switch. With the
switch in the resting position (switch not
1.
2.
Remove the pinion cap dust cover (if equipped).
depressed), place the continuity light of ohmmeter
leads, one to each terminal on the starter switch.
The light or meter, depending on the instrument
used, should not indicate continuity. The
continuity light, if being used, should be off. If not,
replace the switch (Figure 159).
Push down on pinion spring stop and remove the
pinion lock ring (Figure 158).
Figure 158
1352-21
3.
4.
Remove the pinion stop and the anti-drift spring.
Figure 159
1352-17
Slide pinion off of motor shaft. Inspect and
replace if necessary.
3.
Depress the starter switch. The meter should
show continuity. (The continuity light, if being
used, should be ON.) If no continuity is found,
replace the switch (Figure 160).
CHECKING THE STARTER SWITCH
The tools used to check for defective switches are a
continuity tester/light or an ohmmeter. A continuity
tester or ohmmeter, as the names imply, are used to
test for a completed current flow in an electrical circuit.
STARTER SWITCH INSPECTION
1.
Check the rubber boot on the starter switch for
excessive wear or tear in the rubber boot.
Damage to the boot may let moisture enter
damaging the switch. Replace boot if damaged.
Figure 160
1352-12
6 - 10
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)