DRIVE SYSTEMS
5.
Remove screws securing rotor bearing to left
sideplate and remove end cap (Figure 79).
Mount the bearing flange and bearing to the
sideplate with (3) machine screws and locknuts
(Figure 81).
Slide the end cap shaft through bearing flange,
bearing, and sideplate (Figure 81).
Install the spacer, washer, and rotor pulley on the
end cap shaft. Tighten the rotor pulley by turning
nut counterclockwise finger tight (Left hand
thread) (Figure 81.).
Note: The rotation of the rotor pulley during
operation will tighten the pulley to the correct
torque.
Figure 79
0217-051
6.
Using hole template, locate and mark new
mounting holes as shown in Figure 80.
8.
Assemble the rotor halves and paddles. Refer to
"End Cap/Shaft And Bearing Replacement For
1980 S-200’s" on page 5 - 7. Complete steps 6
and 7.
IMPORTANT: Some earlier units were not
designed with the four self-tapping rotor locating
screws. After the rotor halves are secured to the
new end cap, holes must be drilled. Using holes in
the rotor halves as guides, drill (2) 7/32” holes in
end cap (Figure 82).
Figure 80
0217-052
7.
Drill (3) 3/16 diameter holes in sideplate. Pack the
inside of the bearing flange with enough heavy
grease to fill excess space in the cavity when
bearing is inserted (Figure 81).
Figure 82
0217-054
9.
Reinstall belt. Refer to "Replacing Drive Belt" on
page 5 - 1.
Figure 81
0217-053
5 - 10
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)