DRIVE SYSTEMS
9.
After fitting the new end caps in position, slide the
paddles into position and reinstall the screws
(Figure 120). The screws that hold the impeller
assembly together should be torqued to 15 in·lbs.
(DO NOT OVERTORQUE!)
Figure 118
0217-069
6.
Remove all screws retaining the rubber paddles to
the rotor shells (Figure 119).
Figure 120
0217-071
10.
11.
When replacing the end caps, the rotor shafts
should also be replaced.
Slide the rotor shell assembly back into the
housing of the snowthrower and align the rotor
shafts with the four mounting holes. Tighten all
four carriage bolts (Figure 116).
12.
Reinstall the stripper assembly over the impeller
sprocket with both self-tapping screws (Figure
115). (
Note: The mounting holes for the stripper
assembly are slotted. Rotate the impeller
assembly to assure the impeller sprocket moves
freely within the stripper assembly.) Should the
stripper assembly be worn, replace.
Figure 119
0217-070
7.
8.
Remove the impeller sprocket/end cap assembly
from both rotor shells (Figure 119).
When replacing with the new impeller sprocket/
end cap assembly, be certain to align the small
tabs on the end plate with the slots in the rotor
shells (Figure 117). The same procedure is also
used on the right hand end cap.
5 - 24
Single Stage Snowthrower Service Manual
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 1028 Power Shift, Toro 1332 Power Shift, Toro 38014, Toro 38030, Toro 38079, Toro 38087, Toro 38400, Toro 38405, Toro 38513, Toro 38543, Toro 38558, Toro 38559, Toro 38574, Toro 624, Toro 824, Toro 828, Toro 924, Toro CCR 1000 |
| Model Year | 1978, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 200000001 - 200999999 |
| Product Name | Toro CCR 1000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Single Stage, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | HSK635-1721A |
| Engine Motor Size | 3.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)