Toro 04130SL Rev C Service Manual Multi Pro 5700 D Preface Publication

Actuator Oil Level
RESERVOIR
PLUG
UP
Under normal  conditions, actuator oil  level should re-
main constant. If any oil is spilled from the reservoir dur-
ing air bleeding, the  oil level in the actuator should  be
checked and adjusted.
RESERVOIR
CYLINDER
1.
Thoroughly clean the exterior of actuator to prevent
contaminates from entering the actuator.
VISE
CLAMPING
AREA
2.
Make sure that the actuator cylinder is fully retracted.
IMPORTANT: To prevent actuator damage, use vise
with protective jaws when clamping actuator.
ELECTRIC
MOTOR
3.
Place the actuator in a vise making sure that actuator
is clamped in the area identified in Figure  49. Use just
enough clamping  force to  hold the  housing securely.
Make sure that the reservoir plug is orientated up.
DOWN
Figure 49
CAUTION
The actuator reservoir is pressurized. If the res-
ervoir  plug  is removed  too  quickly,  oil  under
pressure can be ejected from the actuator.
0.984”
(25
mm)
4.
Slowly loosen and remove the reservoir plug at the
top of the reservoir.
5.
reservoir oil is clear. If the oil appears milky, perform ac-
tuator air bleeding procedure.
Using a light through the plug hole, confirm that the
6.
Use a clean rod to identify the level of oil in reservoir.
Distance from plug fitting to oil level should be .984” (25
mm). If necessary, add ISO VG 32 mineral oil to actuator
reservoir to adjust oil level.
Figure 50
7.
When oil level is correct, use a 12 volt DC power sup-
ply to power the actuator and extend the cylinder com-
pletely.
IMPORTANT: To ensure proper reservoir  pressure,
make sure that  cylinder is extended before  instal-
ling reservoir plug.
8.
Install the reservoir plug and torque from 45 to 60 in–
lb (5.1 to 6.8 N–m).
Actuator Disposal
If actuator disposal  is necessary, remove hydraulic oil
from actuator before disposal.
1.
Open actuator reservoir  (see Steps 1  through 4 in
Actuator Air Bleeding).
2.
Drain oil from actuator.
Multi Pro 5700–D
Spray System
Page 6 – 49    Rev. A
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 212 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website