Toro 04130SL Rev C Service Manual Multi Pro 5700 D Preface Publication

6.
Disconnect throttle cable from engine (Fig. 8).
8.  Reconnect throttle cable to engine (Fig. 8).
A.  Loosen jam  nut  that  secures throttle  cable  to
throttle plate on engine.
A.  Position throttle cable end to speed control lever
on engine and secure with e–ring.
B.  Remove  e–ring that  secures  throttle  cable  to
speed control lever on engine.
B.  Secure throttle cable to throttle  plate on engine
with jam nut.
C. Position  throttle cable away from the engine.
Remove fasteners that secure spray control console
9.  Secure radiator  shroud to radiator  with six (6) cap
screws (items 5 and 6), lock washers and flat washers.
7.
to seat box assembly (Fig. 9). Carefully pivot seats and
control console forward to allow  radiator access. Take
care not to damage the wire harness or throttle cable.
10.Place overflow  hose to radiator  flange and secure
with hose clamp (Fig. 9).
11.
Make sure radiator drain is closed. Fill radiator with
8.
Remove four (4) cap screws (item 19), lock washers
coolant (see Operator’s Manual).
and flat washers that secure fan shroud to radiator.
12.Check
position of wires, hydraulic hoses and control
9.
Remove two (2) cap screws (item 22), flat washers
cables for proper clearance with rotating, high tempera•
and flange nuts that attach fan shrouds.
ture and moving components.
10.Carefully
lift upper fan shroud from machine.
13.Start engine and check for proper operation. Check
all hose connections for leaks.
11.
Remove two (2) flange nuts (item 26) that secure the
isomounts on the bottom of the radiator to the machine
frame.
2
12.Carefully
lift radiator up from machine.
Installation (Figs. 7)
Replace any foam seal pieces that are damaged or
1.
deteriorated.
1
2.
Make sure that lower fan shroud is positioned below
fan.
3.
Carefully lower radiator  to the machine frame.  Se•
cure isomounts on the bottom of the radiator to the ma•
chine frame with two (2) flange nuts.
Figure 8
1.
Throttle cable
2.
Throttle plate
4.
Position  upper fan  shroud  to radiator.  Attach  fan
shrouds with  cap screws  (item 22),  flat washers  and
flange nuts.
2
5.
Secure radiator shrouds to radiator with four (4) cap
2
screws (item 19), lock washers and flat washers. Make
sure  that clearance  exists  between radiator  shrouds
and fan at all points before tightening fasteners.
6.
Connect lower and upper hoses to the radiator. Se•
cure hoses with hose clamps.
1
7.
Carefully pivot seats and spray control console back
in position taking care not to damage wiring harness or
throttle cable. Install fasteners to secure control console
to seat box assembly.
Figure 9
1.
Overflow hose
2.
Spray console fastener
Multi Pro 5700–D
Page 3 – 11
Kubota Diesel Engine
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 212 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website