Toro 04130SL Rev C Service Manual Multi Pro 5700 D Preface Publication

Adjustments
Adjust Traction Pedal for Neutral
The piston (traction) pump control lever should return to
the neutral position when the traction pedal is released.
If the machine creeps when in neutral, check the follow•
ing items:
2
3
1
1.
The centering arms should be parallel to each other
and also parallel to the centerline of the machine.
2.
The centering arms should touch both front and rear
4
bearings on control plate.
3.
The  centering  arms should  be  tensioned  by  two
springs.
4.
The bearings attached to control plate should rotate
freely.
Figure 23
Reposition the control plate on the piston pump control
lever if needed.
1.
2.
Centering arm
Bearing
3.
4.
Spring
Control plate
Adjust Relief Valve
The spray pump drive circuit relief valve is located on the
left  side of  the piston  (traction)  pump (Fig.  24).  The
steering circuit relief valve is located under the suction
hose on the right side of the gear pump (Fig. 25). Relief
pressure should be tested before and after adjusting the
relief valve  (see Steering Circuit  Relief Pressure Test
and Spray Pump Drive Circuit Relief Pressure Test in the
Testing section of this chapter). Adjustment of the relief
valve can be performed as follows:
1
3
2
NOTE:  Do not remove the relief valve for adjustment.
NOTE:  To gain access  to the  adjustment socket and
jam nut on the steering circuit relief valve, remove plastic
cap.
Figure 24
1.
2.
Spray circuit relief valve
Relief valve body
3.
Jam nut
1.
To increase relief pressure  setting, loosen jam nut
on relief valve and turn the adjustment socket on the re•
lief valve in a clockwise direction. A 1/8 turn on the sock•
et will  make a  measurable change in  relief pressure.
Tighten jam nut after adjustment.
2
2.
To decrease pressure setting, loosen jam nut on re•
lief valve and  turn the adjustment  socket on the relief
valve in a counterclockwise direction. A 1/8 turn on the
socket will  make a measurable  change in relief  pres•
sure. Tighten jam nut after adjustment.
1
3.
Recheck spray pump drive circuit relief pressure and
readjust as needed.
Figure 25
1.
Steering relief valve
2.
Gear pump
Multi Pro 5700–D
Page 4 – 25
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 212 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website