Toro 04130SL Rev C Service Manual Multi Pro 5700 D Preface Publication

Removal (Fig. 38)
Park machine on  a level surface,  stop engine, en•
1.
1
gage parking brake, and  remove key from the ignition
switch.
CAUTION
3
Rotate steering wheel and depress traction ped•
al in both forward and reverse to relieve hydrau•
lic  system pressure  and to  avoid  injury from
pressurized hydraulic oil.
2
2.
system pressure.
Operate  all hydraulic  controls to  relieve  hydraulic
Figure 43
1.
2.
PWM Valve
Solenoid
3.
Solenoid connector
3.
Read the  General  Precautions for  Removing and
Installing Hydraulic System Components at  the begin•
ning of the Service and Repairs section of this chapter.
1
4.
Clean hydraulic  hose ends  prior to disconnecting  the
hoses from PWM Valve.
Label all hydraulic connections to ease reassembly.
3
2
5.
PWM Valve. Allow hoses to drain into a suitable contain•
er.
Disconnect four (4)  hydraulic hoses from fittings in
4
6.
Put caps or plugs on disconnected hoses and fittings
to prevent contamination.
7.
Disconnect  PWM  Valve  solenoid  connector from
machine wiring harness (Fig. 43).
Figure 44
8.
Remove two (2) cap screws and flange nuts that se•
cure PWM Valve to pump mount bracket. Locate and re•
trieve two (2) flat washers from between PWM Valve and
pump mount  bracket. Remove  PWM Valve  from ma•
chine.
1.
2.
IN port (from gear pump)
CF port (to motor)
3.
4.
EX port (to oil cooler)
Solenoid coil
Installation (Fig. 38)
1.
Place two (2) cap screws into PWM Valve mounting
holes. Install flat washer on screws and  position Valve
to pump mount bracket. Install and  tighten flange nuts
to secure PWM Valve to bracket.
2.
Remove caps and  plugs from hydraulic hoses and
fittings.  Lubricate  new  o–rings  and  install  hydraulic
hoses to fittings in PWM Valve.
3.
Plug PWM  Valve solenoid connector  into machine
wiring harness.
4.
Check fluid level in hydraulic oil reservoir and adjust
as required (see Operator’s Manual).
5.
Operate machine and inspect for leaks.
Multi Pro 5700–D
Page 4 – 47
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 212 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website