Toro 04127SL Rev C Service Manual Workman E2050 E2065 Preface Publication

Removal (Fig. 11)
Park vehicle  on a  level surface, turn  on/off switch
1
1.
OFF, set parking brake and remove key from the on/off
switch.
2.
Open the battery circuit by carefully removing one of
2
the battery cables  (see Opening Battery Circuit  in the
General Information  section of  Chapter 3 –  Electrical
System).
A
3.
4.
tacle plate to front of seat base. Unplug charger wire har-
ness from vehicle wire harness and remove receptacle
plate assembly from vehicle.
Remove seats from seat base.
Remove four (4) screws (item 12) that secure recep-
4
Figure 12
1.
Negative cable to vehicle
2.
Positive cable to vehicle
5.
On Workman e2065, remove parking brake assem-
bly from seat base (Fig. 13) (see Parking Brake (Work-
man  e2065)  in  the  Service  and  Repairs  section  of
Chapter 4 – Transaxle and Brakes).
1
6.
Remove eight (8) flange head screws (item 10) that
5
4
secure seat  base to  vehicle.  Locate and  retrieve flat
washers (item 11) from screws that secure front of seat
base.
2
7.
Carefully lift seat base from vehicle.
Installation (Fig. 11)
Position seat base to the vehicle.
3
1.
NOTE:  Do not tighten fasteners securing the seat base
until all fasteners are in place.
2.
Install four (4) flange head screws (item 10) through
holes in front frame and into rear seat base threaded in-
serts. Install four (4) flange head screws (item 10) and
flat washers (item 11) through holes in front frame and
into front seat base threaded inserts.
WORKMAN e2065
3.
head screws to secure seat base to vehicle.
Starting at the middle  of the vehicle, tighten flange
Figure 13
1.
2.
3.
Parking brake cover
Brake cable (2 used)
Seat base
4.
5.
Brake equalizer
Parking brake lever
4.
On Workman e2065, install parking brake assembly
to seat base  (see Parking Brake (Workman e2065)  in
the Service and Repairs section of Chapter 4 – Trans-
axle and Brakes).
5.
Connect charger wire  harness to vehicle  wire har-
ness. Secure receptacle plate to seat base with four (4)
screws (item 12).
6.
7.
nals. Install lock  washer and nut on  battery terminals.
Torque nuts from 115 to 125 in–lb (13 to 14.1 N–m).
Install seats to vehicle.
Reconnect removed battery  cable to battery termi-
Workman e2050/e2065
Page 5 – 21
Chassis (Rev. B)
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 120 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website