Toro 04127SL Rev C Service Manual Workman E2050 E2065 Preface Publication

Removal (Fig. 14)
Park vehicle  on a  level surface, turn  on/off switch
OFF, set parking brake and remove key from the on/off
switch.
5.  Connect wire harness connectors to headlight termi-
nals with screws.
1.
6.  Reconnect removed battery  cable to battery termi-
nals. Install lock  washer and nut on  battery terminals.
Torque nuts from 115 to 125 in–lb (13 to 14.1 N–m).
2.
Open the battery circuit by carefully removing one of
the battery cables  (see Opening Battery Circuit  in the
General Information  section of  Chapter 3 –  Electrical
System).
1
3.
Remove screws attaching the wire harness connec-
tors to each headlight.
2
4.
(item 7) that secure bumper to vehicle. Remove bumper.
Remove two (2) cap screws (item 8) and flat washers
A
5.
the center–lower hood to the front frame support.
Remove both flange head screws (item 11) securing
6.
9)
Remove flange nut (item 4), both flat washers (item
and flange head screw (item 10) securing the hood to
4
each fender front.
Figure 15
1.
Negative cable to vehicle
2.
Positive cable to vehicle
7.
Remove both flange nuts  (item 4) and flange head
screws (item  2) securing the  hood to the  top of  each
fender.
8.
ing the hood to the dash. Remove hood from the vehicle.
Remove two (2) flange head screws (item 2) secur-
Installation (Fig. 14)
1.
Position hood to the vehicle.
NOTE:  Do not tighten fasteners securing the hood until
all fasteners are in place.
2.
Install fasteners removed during hood removal:
A.  Two (2) flange head screws (item  2) that fasten
hood to the dash.
B.  Two (2) flange head screws (item  2) and flange
nuts (item 4) that fasten hood to the top of each fend-
er.
C. Flange  head screw  (item 10), two  flat washers
(item 9) and flange nut  (item 4) that fasten hood to
each fender front.
D. Two flange head screws (item 11) that fasten cen-
ter–lower hood to the front frame support.
3.
4.
Tighten all fasteners securing the hood.
Secure bumper to  vehicle with two (2)  cap screws
(item 8) and flat washers (item 7).
Workman e2050/e2065
Page 5 – 23
Chassis (Rev. B)
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 120 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website