Adjustments
Accelerator Switch Adjustment
1.
switch OFF and remove key. Apply parking brake.
Position vehicle on a level surface, turn On/Off
2
3
1
2.
Make sure that at complete brake pedal travel, the
park detent and pawl are fully engaged. If needed, ad-
just the accelerator pedal stop cap screw to allow full en-
gagement (Fig. 11).
6
5
3.
4.
distance between the head of the accelerator switch
stop cap screw and the body of the switch is 5/8 inch (1.6
cm) (Fig. 12).
Disengage the parking brake.
With the accelerator pedal released, check that the
4
Figure 10
4.
5.
6.
1.
2.
3.
Accelerator pedal
Accelerator switch
Plate
Screw (2 used)
Switch stop cap screw
Lock nut
5.
celerator switch stop cap screw position (Fig. 11).
If distance is incorrect, loosen lock nut and adjust ac-
6.
not bottomed out when accelerator pedal is released.
After adjustment, make sure that switch plunger is
2
3
7.
After adjustment to switch stop cap screw, make
sure that the switch does not open when the parking
brake is engaged. Readjust switch stop cap screw if re-
quired.
1
8.
Calibrate accelerator system after adjusting acceler-
ator switch (see Accelerator System Calibration in this
section).
Figure 11
1.
2.
3.
Accelerator switch
Switch stop cap screw
Accelerator stop cap screw
5/8 inch
(1.6 cm)
2
1
Figure 12
1.
Switch stop cap screw
2.
Accelerator switch
Workman e2050/e2065
Electrical System (Rev. B)
Page 3 – 11
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro Workman E2050, Toro Workman E2065 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)