Safety Instructions
The Workman e2050 and e2065 are designed and
tested to offer safe service when operated and main-
tained properly. Although hazard control and accident
prevention are partially dependent upon the design and
configuration of the machine, these factors are also de-
pendent upon the awareness, concern and proper train-
ing of the personnel involved in the operation, transport,
maintenance and storage of the machine. Improper use
or maintenance of the machine can result in injury or
death. To reduce the potential for injury or death, comply
with the following safety instructions.
WARNING
To reduce the potential for injury or death,
comply with the following safety instructions.
Before Operating
1.
Read and understand the contents of the Operator’s
2. Keep all shields, safety devices and decals in place.
If a shield, safety device or decal is defective, illegible or
damaged, repair or replace it before operating the ma-
chine. Also tighten any loose nuts, bolts or screws to en-
sure machine is in safe operating condition.
Manual before starting and operating the machine. Be-
come familiar with the controls and know how to stop the
machine quickly. A replacement Operator’s Manual is
available on the Internet at www.Toro.com or by sending
the complete model and serial number to:
The Toro Company
Attn. Technical Publications
8111
Lyndale Avenue South
Bloomington, Minnesota 55420–1196
While Operating
3.
Before getting off the operator seat:
WARNING
A. Stop vehicle, turn on/off switch OFF and remove
key from switch.
The Workman e2050 and e2065 are off–highway
vehicles only. They are not designed, equipped
or manufactured for use on public streets, roads
or highways.
B. Set parking brake.
4. If vehicle is parked on incline, chock or block the
wheels after getting off the vehicle.
1.
Sit on the operator seat when starting and operating
the vehicle.
2.
Before starting the vehicle:
A. Make sure that the battery charger is discon-
nected from the vehicle charger receptacle.
B. Engage the parking brake.
C. Make sure accelerator pedal is not depressed.
D. Check position of forward/reverse switch and Hi/
Low speed switch.
Safety (Rev. B)
Page 1 – 2
Workman e2050/e2065
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro Workman E2050, Toro Workman E2065 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)