Wheel Removal (Fig. 2)
Park machine on a level surface, fully raise coring
head, engage parking brake, stop engine and remove
key from the ignition switch. Secure coring head with
service latch.
2. If front wheel was removed:
1.
A. If weight studs were removed from wheel weight
adapters, thread studs fully into the correct end of the
adapter (Fig. 3).
B. Position front wheel to wheel hub.
2.
with blocking or jack stands (see Operator’s Manual and
Jacking Instructions in Chapter 1 – Safety).
Jack machine from ground and support machine
C. Secure wheel to machine with two (2) lug nuts
and two (2) wheel weight adapters. Torque wheel
fasteners from 45 to 55 ft–lb (61 to 75 N–m).
3.
4.
If rear wheel is to be removed:
A. Loosen and remove four (4) lug nuts from wheel
to be removed.
CAUTION
B. Pull wheel from machine.
If front wheel is to be removed:
To prevent personal injury, make sure that
wheel weight is supported as it is installed to
the machine. Wheel weight weighs approxi•
mately 73 pounds (33.1 kg).
A. Remove two (2) lock nuts and thrust washers that
secure wheel weight to wheel.
D. Carefully slide wheel weight to wheel.
E. Secure wheel weight with two (2) thrust washers
and lock nuts.
CAUTION
3.
from coring head before machine use.
Lower machine to ground. Remove service latch
To prevent personal injury, make sure that
wheel weight is supported as it is removed
from the machine. Wheel weight weighs
approximately 73 pounds (33.1 kg).
B. Carefully slide wheel weight from weight studs.
C. Loosen and remove two (2) lug nuts and two (2)
wheel weight adapters with weight studs.
D. Pull wheel from machine.
Wheel Installation (Fig. 2)
WHEEL STUD
(.500–20 UNF–2B)
WEIGHT STUD
(.500–13 UNC–2B)
1.
If rear wheel was removed:
A. Position rear wheel to wheel hub.
Figure 3
B. Secure wheel to machine with four (4) lug nuts.
Torque lug nuts from 45 to 55 ft–lb (61 to 75 N–m).
ProCore 648
Page 6 – 5
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 648 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)