Toro 04129SL Rev C ProCore 648 Service Manual

Disassembly (Fig. 28)
Park machine on  a level surface, fully  raise coring
head, engage parking brake, stop  engine and remove
key from  the ignition switch.  Secure coring head  with
service latch.
7
11
10
1.
10
8
9
6
5
2.
Remove pump belt cover from machine (see Opera-
4
tor’s Manual).
3.
Remove two (2) lock nuts that secure pump shield to
pump (Fig. 29). Remove shield from pump. Locate and
retrieve two (2) flat washers from tops of studs on pump
control assembly.
1
3
2
CAUTION
Figure 29
The extension spring is under tension  and may
cause personal injury during removal. Use cau-
tion when removing spring from neutral lever.
1.
2.
3.
4.
5.
6.
Hydraulic pump
7.
8.
9.
10. Lock nut
11.  Pump shield
Trunnion clamp
Socket hd screw (2 used)
Washer head screw
Cap screw (2 used)
Control bracket
Flange nut (2 used)
Flat washer
4.
Remove components from  pump control assembly
Pump lever
as needed using Figures 28, 29 and 30 as guides.
Assembly (Fig. 28)
2
1.
Install removed components to pump control assem-
bly using Figures 28, 29 and 30 as guides.
A.  If rod  ends were  removed from  damper, apply
Loctite #242 to threads of damper shaft before instal-
ling rod ends.
1
B.  Damper should be secured to third hole from out-
er end of traction lever (Fig. 30).
2.
control assembly. Position pump shield to pump and se-
cure with two (2) lock nuts.
Place two (2) flat washers to tops of studs on pump
Figure 30
2.
1.
Damper
Rod end location
3.
Install pump belt cover to machine  (see Operator’s
Manual).
4.
Check traction drive for neutral and adjust if needed
(see Operator’s Manual).
5.
Operate machine and verify hole spacing accuracy.
Adjust if needed (see Operator’s Manual).
ProCore 648
Page 4 – 37
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 164 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website