Toro 04129SL Rev C ProCore 648 Service Manual

Removal (Fig. 11)
Park machine on  a level surface, fully  raise coring
head, engage parking brake, stop  engine and remove
key from  the ignition switch.  Secure coring head  with
service latch.
Installation (Fig. 11)
1.
1.  Position  drive belt to  machine pulleys.  Make sure
that belt is routed under idler pulley.
2.
Position clutch strap (item 10) to clutch and  secure
with cap screw (item 8), flat washers (item 6) and flange
nut (item 5).
2.
Remove belt cover (see Operator’s Manual).
3.
Remove exhaust system  shield (see Exhaust Sys•
3.  Plug machine wire harness connector into clutch.
tem  Removal in  the  Service and  Repairs  section  of
Chapter 3 – Kohler Engine).
CAUTION
4.
Insert nut driver or small piece of pipe onto the end
of the torsion spring (item 16) of the idler pulley.
Be careful  when removing  or applying tension
from or to the torsion  spring of the idler pulley.
The spring is  under heavy load and may cause
personal injury.
CAUTION
Be careful  when removing  or applying tension
from or to the torsion  spring of the idler pulley.
The spring is  under heavy load and may cause
personal injury.
4.
Insert nut driver or small piece of pipe onto the end
of the torsion spring  (item 16) of the idler pulley. Push
down on the spring end and hook the spring on the idler
mounting bracket to tension the idler pulley.
5.
from the idler mounting bracket.
Push down on the spring end and unhook the spring
5.  Install exhaust system shield (see Exhaust  System
Installation in the Service and Repairs section of Chap•
ter 3 – Kohler Engine).
6.
Loosen and remove cap screw (item 8), flat washers
(item 6) and flange nut (item 5) that secure clutch strap
(item  10) to  clutch.  Position  clutch strap  away  from
clutch.
6.  Install belt cover (see Operator’s Manual).
7.
Remove service latch from coring head before using
machine.
7.
Unplug machine wire harness connector from clutch.
8.
Remove  primary drive  belt  from pulleys  and  ma•
chine.
ProCore 648
Page 7 – 11
Coring Head
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 164 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website