Hour Meter
Testing
IMPORTANT: Make sure to observe polarity on the
hour meter terminals when testing. Damage to the
meter may result from an improper connection.
QUARTZ
RUNNING: INDICATOR
WINDOW
0
0 0 0 0
1
--
1.
2.
Unplug wire harness connector from hour meter.
Connect positive (+) terminal of a 12 VDC source to
10
HOURS
the positive terminal of the hour meter.
1/10
WHEEL: WHITE W/BLACK NUMBERS
HOUR WHEELS: BLACK W/WHITE NUMBERS
3.
Connect negative (--) terminal of the voltage source
to the other terminal of the hour meter.
Figure 6
4.
(6)
The hour meter should move 1/10 of an hour in six
minutes.
5.
connect wire harness connector to hour meter.
Disconnect voltage source from the hour meter. Re-
Headlight Switch
Theheadlight switchislocatedonthecontrol panel(Fig.
7).
on and off.
This rocker switch allows the headlights to be turned
1
Testing
The switch terminals are marked as shown in Figure 7.
Thecircuitry oftheheadlight switch is shown inthechart
below. With the use of a multimeter (ohms setting), the
switch functions may be tested to determine whether
continuity exists between the various terminals for each
position. Verify continuity between switch terminals.
4
1
5
2
6
3
2
SWITCH
POSITION
NORMAL
CIRCUITS
OTHER
CIRCUITS
ON
2 + 3
1 + 2
5 + 6
4 + 5
Figure 7
2.
OFF
1.
Headlight switch
Back of switch
Workman MD/MDX
Page 6 -- 9
Electrical System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)