Removal (Fig. 5)
Make sure machine is parked on a level surface with
2
1.
the engine OFF.
2.
Raise cargo box and support with prop rod.
3
3.
Thoroughly clean junction of intake hose and carbu-
retor adapter on engine and air cleaner assembly.
4.
Figure 5 as a guide. Discard any removed gaskets and
clean gasket mating surfaces.
Remove air cleaner components as needed using
4
1
Installation (Fig. 5)
IMPORTANT: Any leaks in the air filter system will
allow dirt into engine and will cause serious engine
damage. Make sure that all air cleaner components
are in good condition and are properly secured dur-
ing assembly.
Figure 6
1.
2.
Air cleaner
Carburetor adapter
3.
4.
Breather hose
Intake hose
1.
Assembleallremovedaircleaner components using
Figure 5 as a guide.
A. Install new gaskets (items 10 and 14) if they were
removed.
B. If flange head screws (item 9) were loosened or
removed, torque screws from 60 to 65 in--lb (6.8 to
7.3
N--m).
C. Make sure that air cleaner vacuator valve is
pointed toward ground and slightly toward engineaf-
ter assembly.
D. Make sure to secure intake hoses with hose
clamps.
2.
Lower and secure cargo box.
Workman MDX
Page 3 -- 7
Briggs & Stratton Gasoline Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)