Toro 08160SL Workman MD MDX Service Manual

Seat Base Removal (Fig. 25)
Park machine on  a level surface, stop engine,  en-
1.
gage parking brake  and remove key from the  ignition
switch.
4
2
2.
Flip both seats forward and  remove them from the
5
seat base.
3.
(see Parking Brake Disassembly in this section).
Remove parking  brake  assembly from  seat base
1
4.
short cap  screws securing  the shift  plate to the  shift
bracket (Fig. 26).
Unscrew knob from the shift lever. Remove four (4)
3
5.
plate to the seat base (Fig. 26). Separate shift bracket
from the choke cable and seat base.
Remove four (4) long cap screws securing the shift
Figure 26
1.
2.
3.
Shift lever
Cap screw (short)
Shift plate
4.
5.
Cap screw (long)
Choke cable
6.
ers that secure the seat base to the frame.
Remove eight (8) flange head screws and flat wash-
IMPORTANT: Make sure shift bracket, shift cables,
choke cable and fuel tank do not catch on the seat
base during removal.
7.
Lift seat base carefully from the machine.
Seat Base Installation (Fig. 25)
IMPORTANT: Make sure shift bracket, shift cables,
choke cable and fuel tank do not catch on the seat
base during installation.
1.
Position seat base carefully to the frame.
NOTE:  Do not tighten fasteners securing the seat base
to the frame until all of them are installed.
2.
through  the  frame and  into  the  seat  base.  Tighten
screws from the middle of the vehicle to the outside.
Install eight (8) flange head screws and flat washers
3.
through the opening at the front of the seat base.
Place shift  bracket,  shift cables  and choke  cable
4.
Position choke cable and shift plate to shift bracket
making sure to capture cable flange. Secure shift plate
to shift bracket  with four (4) short  cap screws. Screw
knob onto the shift lever (Fig. 26).
5.
Secure shift plate  to seat base with  four (4) long  cap
screws (Fig. 26).
Position shiftplatewithshiftbrackettotheseatbase.
6.
Parking Brake Assembly in this section).
Install parking  brake assembly  to seat  base (see
7.
Secure seats to seat base.
Workman MD/MDX
Page 7 -- 41
Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 178 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website