Toro 08160SL Workman MD MDX Service Manual

Adjustments
Adjust Ground Speed (Workman MD)
Workman MD  models are  equipped with  a transaxle
governor. Adjust ground speed using the following pro-
cedure.
7.  Adjust throttle cable (accelerator pedal to transaxle)
at the cable bracket until the correct driven clutch RPM
is obtained with the accelerator pedal  fully to the floor
(Fig. 8).
8.
a new anodized rivet (Toro P/N 99--7122) (Fig. 8).
Installanti--tamperbrackettothecablebracketusing
WARNING
9.
box.
Lower machine to ground. Lower and secure cargo
Vehiclesoperating atground speeds greaterthan
the  recommended   speed  will  require   further
distances  to fully  stop.  Do  not adjust  ground
speed greater than specified.
NOTE:  IfunabletoidentifythedrivenclutchRPM,anal-
ternate method to verify ground speed would be to de-
termine the distance that the vehicle will travel on level
ground in three (3) seconds with the accelerator pedal
tothefloor.TheWorkmanMDshouldtravel62feet(18.8
meters) in three seconds.  If necessary, adjust ground
speed using steps 6 through 8 above.
1.
Park machine on a level surface, stop engine and re-
move key from  the ignition switch. Raise and  support
cargo box.
WARNING
Beforejackingupthemachine,reviewandfollow
Jacking Instructions in Chapter 1 -- Safety.
4
1
2.
least1inch(25mm)offtheground.Supporttherearaxle
tubes on appropriate jack stands.
Jack up rear of  vehicle so both rear wheels  are at
3.
vehicle from moving.
Chock front and rear of both front tires to prevent the
2
3
4.
Make sure that the shift lever is in the neutral posi-
tion.
5.
Verify ground speed as follows:
Figure 8
1.
2.
Anodized rivet
Anti--tamper bracket
3.
4.
Throttle cable
Cable bracket
A.  Start engine and  hold accelerator pedal  to the
floor.
B.  Verify driven clutch RPM with a tachometer. With
the accelerator pedal to the  floor, the driven clutch
speed should be from 3550 to 3650 RPM.
6.
odized rivet  and  retain anti--tamper  bracket for  rein-
stallation (Fig. 8).
Ifground speedadjustment isnecessary,drilloutan-
Workman MD/MDX
Page 5 -- 7
Drive Train
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 178 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website