Installation (Fig. 13)
6. Secure swing arm to machine frame with cap
screws, thrust washers and lock nuts. Torque lock nuts
from 70 to 90 ft--lb (95 to 122 N--m).
1.
Position swing arm to engine tray assembly.
2.
swing arm so that the flange is positioned between the
swing arm bracket and engine tray location (Fig. 15).
Makesurethatisolationmounts arepositioned inthe
7.
screw and lock nut. Insert cap screw from the inside of
the swing arm brackets.
Secure both shock absorbers to swing arm with cap
3.
flat washers and flange nuts (Fig. 14).
Secureenginetraytotheswingarmwithcapscrews,
8.
Lower machine to ground.
9.
and swing arm.
Connect parking brake cables to rear brake levers
4.
screws and flat washers (Fig. 14).
Secure transaxle to swing arm with four (4) cap
10.Install
Installation in the Service and Repairs section ofEngine
Chapter).
muffler to machine (see Exhaust System
IMPORTANT: Take care to not damage the engine,
transaxle, fuel hoses, electrical harness or other
parts while raising the swing arm and engine tray
assembly.
11.Lower and secure cargo box.
5.
to the machine frame. Align swing arm pivots to frame
mounting points.
Carefully, raise swing arm and engine tray assembly
12.Check parking brake operation and adjust if neces-
sary (see Adjust Parking Brake in the Adjustments sec-
tion of this chapter).
Chassis
Page 7 -- 24
Workman MD/MDX
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)