Toro 98958SL Rev C Service Manual Reelmaster 4000 D Preface Publication

26.
Alignment studs can be very helpful in reassembly
of the motor. If you use studs, install 2 studs diagonally
opposed in the bearing housing.
27.
Install the shaft face seal in the wear plate as shown
in Fig. 81. Do not distort seal.
28.
29.
Install the wear plate, see Fig. 81.
Apply a light film of petroleum jelly to the 3[76] diam-
eter seal and install seal in the wear plate.
30.
Install the drive into the output shaft.
31.
Align the notch on the outside of the Geroter with the
notch on the wear plate. Install the Geroter against the
wear plate. Be sure to retain the rollers in the outer ring
if they are loose.
32.
Install the valve drive in the Geroter.
NOTE:  Installation at this time involves  3 steps in the
timing of the motor. Timing determines  the direction of
rotation of the output shaft. Timing parts include:
1.
2.
3.
4.
Geroter
Valve Drive
Valve Plate
Valve
Timing Step #1−Locate the  largest open pocket in the
Geroter and mark it on the outside edge of the Geroter.
Figure 82
Figure 83
Figure 84
33.
Apply a light film of petroleum jelly to the 3[76] diam-
eter seal. Install seal in groove of valve plate.
34.
Align the notch on the outside of the valve plate with
the notch on the Geroter as shown in Fig. 82.
Timing Step  #2−Locate the  slot opening  in the  valve
plate which is in line with the largest open pocket of the
Geroter.
Timing Step #3−Locate any one of the side openings of
the valve and align this opening with the open slot of the
valve plate that is in line with the largest open pocket of
the Geroter. Install the valve by rotating it clockwise until
the spline teeth engage (1/2 spline tooth max). This will
provide the proper rotation when pressurized as shown
in Fig. 83.
35.
Install 2 springs and 2 pins in the holes located in the
bore of the valve housing, as shown in Fig. 81.
36.
Apply a light film of petroleum jelly to the 3[76] diam-
eter seal. Install seal in the valve housing.
Hydraulic System
Page 4 − 84
Reelmaster 4000−D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 188 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website