Toro 98958SL Rev C Service Manual Reelmaster 4000 D Preface Publication

6.
Bring spring slots of both parts in line and stand parts
on end of bench. Insert spring  installation tool through
spring slots of both parts. Tool is available from an Eaton
hydraulics supplier as Eaton part no. 600057. Position
3
pairs of  centering springs  (or 2  sets of  3 each)  on
bench so that extended edge is down and arched center
section is together. In this position, insert one end of en-
tire spring set into  spring installation tool, as shown in
Fig. 39, with spring notches facing sleeve.
7.
Compress extended end of centering spring set and
push into spool  sleeve assembly withdrawing installa-
tion tool at the same time.
Figure 39
8.
Center the spring set  in the parts so that  they push
down evenly  and flush  with the  upper surface  of the
spool and sleeve.
9.
Install pin though spool and sleeve assembly until pin
become flush at both sides of sleeve.
10.
Position the spool and sleeve assembly so that the
splined end of the spool enters the 14−hole end of hous-
ing first, see Fig. 40.
IMPORTANT:  Be extremely careful that the parts do
not tilt  out of position  while inserting. Push  parts
gently into place with slight rotating action, keep pin
nearly horizontal. Bring the spool assembly entirely
within the housing bore until the parts  are flush at
the meter end or 14−hole end of housing. Do not pull
the spool assembly beyond this point to prevent the
cross pin from dropping into the discharge groove
of the housing. With the spool assembly in this flush
position, check for free rotation within the housing
by turning with light  finger tip force at the  splined
end.
Figure 40
Hydraulic System
Page 4 − 46
Reelmaster 4000−D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 188 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website