Maintenance and Service
26.
gine and remove key from the switch.
Before servicing or making adjustments, stop en-
34. Do not overspeed the engine by changing governor
setting. Maximum engine speed is 2500 rpm + or − 100
rpm. To assure safety and accuracy, have an Authorized
Toro Distributor check maximum engine speed.
27.
Assure entire machine is properly maintained and
in good operating condition. Frequently check all nuts,
bolts and screws.
35. Shut engine off before checking or adding oil to the
crankcase.
28.
Frequently check all hydraulic line connectors and
fittings. Assure all hydraulic hoses and lines are in good
condition before applying pressure to the system.
36. Disconnect battery before servicing the machine. If
battery voltage is required for troubleshooting or test
procedures, temporarily connect the battery.
29.
Keep body and hands away from pin hole leaks or
nozzles that eject high pressure hydraulic fluid. Use
cardboard or paper to find hydraulic leaks. Hydraulic
fluid escaping under pressure can penetrate skin and
cause injury. Fluid accidentally injected into the skin
must be surgically removed within a few hours by a doc-
tor or gangrene may occur.
37. Toro recommends that two people be used to back-
lap reels. Each person has specific duties and you must
communicate with one another.
38.
For optimum performance and safety, use genuine
Toro replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous and may void the product warranty
of The Toro Company.
30.
Before any hydraulic system maintenance, stop en-
gine and lower cutting units to the ground so all pressure
is relieved.
39.
When changing attachments, tires, or performing
31.
local Toro Distributor.
For major repairs or other assistance, contact your
other service, use correct blocks, hoists, and jacks.
Make sure machine is parked on a solid level floor such
as a concrete floor. Prior to raising the machine, remove
any attachments that may interfere with the safe and
proper raising of the machine. Always chock or block
wheels. Used jack stands or solid wood blocks to sup-
port the raised machine. If the machine is not properly
supported by blocks or jack stands, the machine may
move or fall, which may result in personal injury.
32.
free of excessive grease, grass, leaves and dirt. Clean
protective screen on back of engine frequently.
To reduce potential fire hazard, keep engine area
33.
If engine must be running to perform maintenance
or an adjustment, keep hands, feet, clothing and other
parts of the body away from cutting units and other mov-
ing parts. Keep everyone away.
Reelmaster 4000−D
Safety
Page 1 − 3
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 4000 D, Toro 98958SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)