TEST NO. 3: Check Reel Circuit Working and Relief Pressures
Procedure For Working Pressure Check:
1.
Install a 5,000 psi gauge into the cutting circuit quick
disconnect.
1
2.
Operate the unit while monitoring the gauge.
RANGE OF TESTER READINGS 0 − 2750 PSI
If working pressure is too high or too low, perform re-
2
3.
lief pressure check.
NOTE: Due to special conditions or customer prefer-
ence, the counterbalance may require setting outside
this recommended range. However, the range listed will
be adequate for most conditions.
Figure 17
Procedure For Relief Pressure Check:
1.
Cutting circuit test port
2.
Reel control valve
1.
Hydraulic oil must be at operating temperature.
2.
Install a 5,000 psi gauge into the cutting circuit quick
disconnect.
3.
Start the engine and lower the No. 2 (left front) and 3
(right front) cutting units to the ground.
4.
5.
Turn the engine OFF.
Block the reel of the No. 2 cutting unit to prevent rota-
tion. The No. 2 cutting unit motor is the first in series flow
from the pump. Use a substantial hardwood block in-
serted between the reel blades.
CAUTION
Stand clear of the reels during the following proce-
dures.
6.
7.
8.
Place reel speed control knob at minimum.
Start engine and position throttle at idle.
Ease the reel control lever into “MOW” while monitor-
ing the gauge.
NOTE: It may be necessary to raise the throttle slightly
to prevent the engine from stalling.
TESTER READING TO BE 2650 − 2750 PSI
9.
If reel circuit relief pressure is above 2750 psi or below
2650
psi, clean or replace relief valve in reel control
valve.
Reelmaster 4000−D
Page 4 − 33
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 4000 D, Toro 98958SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)