Change Hydraulic Oil
Normally, change hydraulic oil after every 2 years or
1500
operating hours. If oil becomes contaminated,
contact your local TORO distributor because the system
must be flushed. Contaminated oil looks milky or black
when compared to clean oil.
1
1.
oil flow into drain pan. Tighten plug when hydraulic oil
stops draining (Fig. 93).
Remove drain plug from reservoir and let hydraulic
2
2.
Fill reservoir with approximately 9.3 gallons of hy-
draulic oil. Refer to Hydraulic Oil Specifications.
IMPORTANT:
Use only hydraulic oils specified.
Other fluids could cause system damage.
Figure 93
3.
Install reservoir cover, lower seat and secure with
lock pin. Start engine and use all hydraulic controls to
distribute hydraulic oil throughout the system. Also
check for leaks. Then stop the engine.
1.
Drain plug
2.
Right front fender
2
4.
With cutting units up and oil warm, look into sight
glass. If hydraulic oil is not even with arrows, add
enough to raise to proper level. Do not fill full if oil is cold
(Fig. 94).
1
Figure 94
1.
Hydraulic reservoir
2.
Sight glass
Hydraulic System
Page 4 − 90
Reelmaster 4000−D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 4000 D, Toro 98958SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)