Specifications
2
1
4
11
3
6
5
7
8
10
9
Figure 1
1.
2.
3.
4.
Drive housing cover
drive housing
Drive plate shield
Grass deflector
5.
Rear roller adjuster (both ends)
Reel−to−bedknife adjuster
Guard
9. Reel
10. Optional front roller
11. Top covers
6.
7.
8.
cone nut
Construction: The frame is welded steel. The reel uses
heavy duty, self−aligning ball bearings. The heavy duty
steel rear roller has tapered roller bearings. The rear
roller and bedbar are isolated and mounted in rubber
bushings for quiet, vibration−free operation. Adjustable
deflector shields are standard. Stainless steel compo-
nents are used at key points for added durability.
Height−of−Cut: 5 Blade − 1 to 3 inches (25 to 76 mm).
7 Blade − 1/2 to 1−3/4 inch (9.5 to 45 mm). 11 Blade −
3/8 to 3/4 inch (9.5 to 19 mm).
Height−of−Cut Adjustment: Quick adjustment and
positive locking is provided by locking type cone nuts.
Gauge marks of 1/4 inch (6.3 mm) are provided as a ref-
erence for easy changes of height−of−cut.
Reel Configuration: The 5, 7, and 11 blade heavy duty
welded reels all have 8 inch (20.3 cm) diameters and are
Clip (variable to match cutting conditions):
29−3/4
in. (75.5 cm) wide.
5
(0.352
Blade Cutting Unit: 0.176 inch per mph
inch at 2 mph to 1.32 inch at 7.5 mph)
Bedknife/Bedbar Assembly: A replaceable, single
edged, alloy steel bedknife is induction hardened. The
bedknife is fastened with steel screws to a precision
ground surface on the high strength, fabricated steel
bedbar. The stress−relieved machined bedbar is
mounted with four (4) vibration isolation bushings.
7
(0.252
Blade Cutting Unit: 0.1 26 inch per mph
inch at 2 mph to 0.945 inch at 7.5 mph)
11
(0.16
Blade Cutting Unit: 0.080 inch per mph
inch at 2 mph to 0.600 inch at 7.5 mph)
Bedknife to Reel Adjustment: Two lockable lead
screw adjusters at each side of the frame adjust the reel
to bedknife contact.
Lubrication: Easily accessible grease fittings for bear-
ings and all major pivot points are provided.
Drive: The reel drive motor turns a maintenance−free
cog belt that drives the reel. Drive pulley and cog belt are
encased in a drive housing for safety and protection
from contamination.
Rear Roller: 3−1/2 inch (89 mm) diameter steel roller
has greaseable tapered roller bearings. A double lip oil
seal and wear sleeve isolates grit and moisture from the
bearings.
Grass Deflector Shields: Shields are fully adjustable.
Cutting Units
Page 7 − 2
Reelmaster 4000−D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 4000 D, Toro 98958SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)